Archive for December 30th, 2006

Mardi Gras Beer

Saturday, December 30th, 2006

Mardi Gras in New Orleans is a truly unique and fun party.  People come from all over the world to experience Mardi Gras parades in New Orleans.  I made this beer for the first time several years ago and it is popular with people who try it - it is on the lighter side, so you can enjoy more of it as you watch the parades roll by.

Ingredients

3 gallons of your favorite bottled water
1 package of Booster
1/3 oz of Galena Hops
1 can West Coast Pale Ale
1 pack Liquid Yeast (Ale Yeast) - this is optional.  A lot of beer mixes come with a packet of dry yeast, but the liquid yeast makes for a better taste.  I’ve tried both and prefer liquid yeast.

Directions

1) At least one day before brewing, put one of the gallons of water in the refrigerator to chill it.  Also, if you’re using the liquid yeast smack pack, take the packet out of the refrigerator and break the inner pouch by placing the packet on a flat surface and pressing down on the packet with your hand until you feel the inner pouch break.

2) Sanitize the beer barrel (preferably with One Step).

3) Put six cups of water (from one of the bottles you didn’t put in the refrigerator) into a pot (2-3 gallon size is preferable, so you have room).  Add the Booster to the water.

4) Stir with a spoon until the Booster is blended.  This will take a little while, as the Booster can get a little thick when it hits the water.  I usually press the Booster against the side of the pot with a spoon, rubbing back and forth to get the Booster to dissolve.

5) Once the Booster is completely dissolved into the water, bring the mixture to a boil.

6) As the mixture gets close to boiling, take the gallon of water from the refrigerator and pour it into the Beer Barrel.

7) Once the water/Booster mixture gets to a boil, remove from the heat and add the West Coast Pale Ale.  Stir until mixed.  This is now known as your wort (Pronounced “wert”).

8) Pour the wort into the beer barrel.  Add water until the water level reaches 8.5 gallons on the barrel.

9) Add the yeast.  Wait five minutes, and then stir the wort thoroughly.

10) That’s it - you’re done until its ready to be bottled!

Make your Own Beer, Right on Your Stove — by Andrew Kasch

Saturday, December 30th, 2006

Homemade beer is the best beer in the world, by far. Have you ever tasted anybody’s homebrew? If you have, you probably thought it was darn good. Let me tell you that when it is your own, it is even better. In fact, it is incomparable to anything else on the planet.

I am a beer lover and long-time homebrewer. There is no other hobby that is as satisfying as this one. I have entered many, many homebrewing competitions and have won lots of blue ribbons for my beers, including at my local County Fair (which is a huge one). In fact I had so many ribbons that I finally threw them all away and stopped entering competitions. Now I just brew what I like and drink it while browsing the internet or watching television with my wife. Yep, life is good for homebrewers.

Listen, anyone can make beer on their stove - and I mean really, really good beer. You don’t have to take it to the level that I did. If you enjoy beer one-tenth as much as I do, then I highly recommend that you at least make one batch in your lifetime, just so you can say you did it. Having brewed a batch a beer changes a person, for the better, and forever. You will then be one of my brethren.

You are going to need some simple pieces of equipment: A large pot to brew in, a big food-grade plastic bucket with a lid to ferment in, a small plastic “airlock” and rubber stopper that goes into a hole in the bucket lid, bottles and caps, and a basic bottlecap crimping tool. It also helps to have something to stir with; a big wooden spoon will do nicely.

There are only four ingredients in beer: water, malt, hops, and yeast. Malt refers to malted barley - for your first batch you will simply use packaged “malt extract.” Hops are best purchased in pellet form; they look like rabbit food. A package of dry brewers yeast costs about one dollar. Water can come from any source, but at least two gallons of it needs to be sanitized. Those 2.5 gallon water vessels from the market work nicely.

Homebrew is typically made in 5 gallon batches. This will fill two cases worth of bottles. Take my advice and go for the large, 22 oz. Bottles, as this is less bottling work. You will need 6 total gallons of starting water with about 2.5 gallons chilled in a sealed container. The plastic bucket should be a 6 gallon size. Over half a gallon of water will evaporate while you are brewing.

Here is what you do:

1. Boil 3.5 gallons of water with 6 pounds of malt extract for one hour, adding an ounce of hops at the beginning of the boil, some more hops after 45 minutes, and some more hops when you turn off the heat. Cool the pot in the sink by running water around it. Sanitize your bucket fermenter with a shot of bleach mixed into it full of water. Let that sit for a few minutes with the airlock and rubber stopper then pour out over the inside part of the bucket lid and rinse everything that the bleach solution touched with hot water.

2. Put the chilled 2.5 gallons of water in the bucket first, then pour the brew from the pot on top of it. Do not stir. Add the yeast and seal the lid tight on the bucket and put the airlock in the stopper and the stopper in the lid-hole. Put water in the air lock. After a day or two the airlock will start bubbling.

3. After a couple weeks its time to bottle the beer. Boil 3/4 cup of sugar with 2 cups of water and add it to your bucket of beer. You can sanitize a measuring cup with hot water, or just put it through the dishwasher with heated drying on. Scoop out the beer with the measuring cup and fill the bottles leaving 1″ of space in them. Crimp the caps on and store the bottles in a cool dark area for two weeks. Clean everything.

4. After two weeks put some bottles in the fridge and enjoy.

Most of brewing is cleaning and sanitation. Everything that comes into contact with your unfermented beer, and even on bottling day after it has fermented, must be sanitized. A small shotglass of household bleach mixed with 5-6 gallons of water makes an effective sanitizing solution, given 5-10 minutes of contact time.

Don’t forget to tell me when the beer is ready to drink. If I live in a nearby state, I just may come over and taste it with you.

Andrew Kasch is a beer lover and long-time award-winning homebrewer. Many of his recipes can be found on his website http://www.makeyourownbeer.info/

Article Source: http://EzineArticles.com/?expert=Andrew_Kasch